Inside The Ultimate Callout Challenge
Today, most people know the UCC as the event that pits competitors against one another in drag racing, a dyno competition and sled pulling – all done with one truck per competitor. How the event came to be is another story.
The Executioner – 6.7L Cummins-based Engine
Drew Pumphrey, owner of D&J Precision Machine, is the engine builder behind Firepunk’s 6.7L Cummins-based engine known as the Executioner. It’s a one-of-a-kind build.
Turbocharged 6.7L Common Rail Cummins Engine
In 2020, Daniel Green, aka Danny Diesel, became a nomad and traveled 40,000 miles across 23 states to go drag racing. This year, he’s doing it again, but he swapped his 12-valve for a common rail Cummins rebuilt by Wagler Competition. See what makes Daniel, his truck and his engine unique.
Mechanical Injected 7.0L Cummins Engine
Just one of three mechanical injected trucks running at UCC this year, John Schirado’s 7.0L Cummins is dialed in and ready to compete. Find out what helps his engine make 2,000 horsepower and why it’s a real threat in drag racing, sled pulling and on the dyno.
Turbocharged 6.7L Solid Block Cummins Engine
Thomas Borrell might not work in the diesel industry, but his passion for diesel motorsports has led him to build what many believe to be the ultimate diesel machine – a UCC truck. Check out his 2010 fourth gen truck and its new Freedom Racing Engines-built 6.7L Cummins engine.
Triple-Turbo 6.4L Cummins Engine
What was once a 1,200-hp, road racing, Dodge Ram 3500 with a 5.9L Cummins, has been sitting in storage since 2008. That was until Spencer Ekstam of FASS Fuel Systems revived the truck and put in this triple-turbo 6.4L Cummins engine with hopes of hitting 3,000 hp. Find out what went into this diesel build!
24-Valve 5.9L Cummins Engine
Ethan Powell of Freedom Diesel Performance has a 1960 Cadillac Coupe de Ville he wants to turn into a fun street vehicle he can bring to car shows. So what did he put under the hood? This 24-valve 5.9L Cummins engine of course! Find out what went into the build.
Boostline Diesel Rods for Duramax & Cummins
Forged from ultra-strong 4340 steel alloy, these rods feature Boostline’s patented 3-pocket design that provides a 60% improvement in bending strength and a 20% stress reduction compared to conventional H-beam designs.
Work Stock/Pro Street 6.7L Cummins Engine
In the Midwest, the Work Stock class is a very large, very serious class featuring 900-plus horsepower engines, so when a customer came to LinCo Diesel Performance for a new engine, the shop built this 6.7L Cummins with plenty of bells and whistles. It has plenty of horsepower too. Check it out!
Cummins Launches Online Store for Genuine Parts & Products
Cummins Inc. has launched its new shop.cummins.com online store giving customers a convenient way to shop for the Genuine Cummins parts and products they depend on. The online store boasts an expansive list of up to 50,000 Genuine new and ReCon Cummins parts and products such as Fleetguard, Valvoline, Power Service, Cummins Onan, Webasto in the U.S.,
2008 Turbocharged 6.7L Cummins Engine
Bought on Craigslist with 120,000 miles on it, CGT Diesel revamped a 2008 4-door short bed Dodge 3500 and its 6.7L Cummins engine to the tune of 900 horsepower. Find out what went into the diesel build.
Diesel of the Week February 2021 Recap
In this recap of February’s diesel engines, we take a look at a twin-turbo 5.9L Cummins engine built by Gomer’s Diesel Inc.; a Super Stock 6.7L Cummins engine built by Perkins Diesel and Dynomite Diesel Products; a 6.7L Enforcer engine built by D&J Precision Machine for Josh McCormack; and a single-turbo LBZ Duramax dragster engine
