MAHLE PowerPak Pistons for Big Block Mopar Engines
These new shelf-stocked PowerPak piston sets from MAHLE are for the 383 and 400 B series and 440 RB series Mopar engines.
Holley’s Latest LS Engine Giveaway
Holley has partnered with high-performance engine builder Prestige Motorsports for its latest giveaway LS engine.
ProCharged 5.000” Bore Space Billet Big Block Chevy Engine
One of the first 5.000″ bore space big block Chevy engines that Visner Engine Development has come out with in this new design, this billet engine was built by Nick Bacalis of Bullet Racing Engines for a 1971 C10 belonging to Michael Rieck. Check out what 4,000-plus horsepower looks like!
Mahle PowerPak Pistons for 6.0L and 6.4L Powerstroke Engines
All four sets offer incredible versatility, allowing a daily driver to become a weekend warrior for drag, dyno, or pulling competitions.
Summit Racing SPC Engine Block
These are brand new, heavy-duty castings that can handle up to 700 horsepower.
Naturally Aspirated 440 cid LT1 Engine
The folks at Late Model Engines in Houston, TX run a top-notch engine and machine shop. You don’t have to look much further than this naturally aspirated 440 cid LT1 engine build to see what we mean. It’s our Engine of the Week!
All-Billet Duramax Drag-and-Drive Engine
Having been put on the back burner due to Wagler Competition’s popular DX Duramax engines, this brand-new billet Duramax engine has finally made it to the forefront. Rather than being aimed at truck pullers, this lighter diesel engine is specifically designed for drag racers and drag-and-drive events. Check out what makes this Duramax unique.
Triple-Turbo 6.4L Cummins Super Stock Engine
Addicted Performance Diesel prioritizes performance and specializes in reinforcing engines and transmissions for both daily use and high-performance racing. Just take a look at shop owner Jason Stott’s personal Super Stock pulling truck with a triple-turbo 6.4L Cummins engine in it.
Stanadyne’s Goliath Performance GDI Pump
The Stanadyne Goliath performance pump is a high-quality, modular solution addressing the fuel flow limiting factors of stock mechanical fuel pumps when trying to increase the power output of GDI engines.
Twin-Turbo 4.8” Bore Space Billet Hemi Engine
There’s a lot of impressive engines that come out of Noonan Race Engineering in Spartanburg, SC. But, the 4.8″ bore space billet Hemi engine was the one that started it all for the high-performance engine and machine shop. Check out the details of this water block 4.8″ bore space billet Hemi.
Elgin Pro Stock Conical Valve Springs
Elgin PRO-STOCK conical valve springs help stabilize valvetrain dynamics and provide superior damping without wear.
Elgin OE Replacement MLS Head Gaskets for Ford 6.7L Diesel Engines
Elgin Industries has introduced original equipment replacement multi-layer-steel head gaskets for 2011-2020 Ford 6.7L diesel engines. The new gaskets – EHG-26661 (left) and EHG-26662 (right) – match the design, fitment and quality of the original equipment gaskets for these engines. Assembled thickness of the MLS gaskets is 1.26mm. In addition to OE-quality head gaskets, Elgin
1,300-Plus HP 615 cid Big Block Chevy Engine
PAR Racing Engines is one of the most successful and well-respected shops on the East coast. When we visited earlier in 2023, we got to see the shop in all its glory, and a pair of 615 cubic inch big block Chevy engines that each crank out over 1,300 hp!
Supercharged 4.900” Bore Space Hemi Engine
Building upon its 4.800″ bore space Hemi engine platform, Noonan Race Engineering made improvements to its 4.900″ bore space Hemi engine to the point that its now one of the engine shop’s bread and butter builds. Don’t let that fool you – this engine is packed with unique features and the performance to back it all up. Check it out.
5.3L LS Engine
Tony Paladino’s shop, Concord Engines, has been serving the Kannapolis, NC area with engine rebuilding and machining services since 2014. One engine platform they specialize in is the LS, and it is offered in three different power levels and configurations. Check it out!.
Valve Springs
High-frequency fatigue, also known as harmonics, are a ubiquitous challenge in racing engines and can potentially wreak havoc on the valvetrain if left unchecked. Well-designed valve springs play a pivotal role in managing this, ensuring essential stability, and minimizing wear on valvetrain components.
The Latest on Lifters
For racing, a common trend to eliminate the problems associated with hydraulic lifters are the use of limited or short-travel hydraulic lifters. A reduction in plunger travel, which is usually about half that of a traditional full-travel lifter, reduces the amount of oil required to fill the lifter, which in turn reduces the compression of aerated oil.
What to Consider When Selecting Pushrods
Determining the correct pushrod length is often regarded as one of the most intricate aspects of the selection process due to the variability in valvetrain geometry and design.
731 cid Outlaw 4.840 Bore Space Nitrous Engine
When it comes to building a 4.840″ bore space engine for drag racing, the class is limited on deck height and limited on bore space, but anything else pretty much goes. Pat Musi of Pat Musi Racing Engines recently finished development on his state-of-the-art 4.840 engine platform, and this 731 cid nitrous combo is freaking awesome!
Naturally Aspirated LS3-Based TA2 Engine
With a 40-year history in all sorts of racing, machining and engine building, Pro Motor Engines in Mooresville, NC can do just about anything in-house from NASCAR to drag racing and everything in between. Just check out this LS3-based TA2 spec engine!
