Moroso Road Race Baffled Oil Pan for Ford Coyote/Voodoo
The oil pan is fully fabricated steel with a thick steel rail with a 4-3/8″ deep, 10-3/4″ long by 14-1/2″ wide rear sump and has a black powder-coat finish.
Triple Turbo Solid Block 6.8L Cummins Engine
According to Truck Source Diesel’s Chris Buhidar, the competition at this year’s UCC event was the stoutest of any UCC yet. Despite the many struggles an event like UCC presents, Chris and his TSD team and their triple turbo, solid block 6.8L Cummins-powered F-350 took home second place overall. Find out why!
Powerstroke Upgrades
Marketed as the ICON series, these cylinder heads are a totally new, built from the ground up, clean sheet, USA design that will replace Kill Devil Diesel’s previous aluminum heads for Powerstroke applications.
F-350 7.3L Powerstroke Engine
Out of every truck Ralph LaBarbera has ever worked on – Duramax, Cummins and Powerstroke – the 7.3L, the entire truck itself, not just the engine, is one of the most cost-efficient trucks per dollar and all-around solid work truck he’s found. That is what made him fall in love with the 7.3L, and why he recently rebuilt his F-350 7.3L Powerstroke. Find out what went into the build.
Lakewood Bellhousings for Small Block Fords
Designed as a compact, lightweight option for transmission swaps, these bellhousings use a 157-tooth flywheel, 10.5-inch clutch and can use hydraulic or cable actuation.
Mild vs. Wild – Horsepower at Any Cost (Diesel Edition) Ep. 3
In this episode of Mild vs. Wild, we take a trip to Bremen, OH to visit Unlimited Diesel Performance to discuss building some 7.3L Powerstroke engines for truck pulling applications. With $50,000 and $90,000 on hand for the two builds, find out whether Mild or Wild takes home the win. Mild vs. Wild (Diesel Edition) is
Supercharged 363 Small Block Ford Engine
Going into a customer’s Fox Body Mustang, this supercharged 363 small block Ford engine was built by Prestige Motorsports to the tune of more than 1,100 horsepower. Featuring a Holley Hi-Ram, a Vortech YSI blower and a Concept One pulley kit, find out what else makes this build special.
Triple Turbo 6.0L Powerstroke Engine
Looking to build a daily driver truck with some power when he wanted it, Art Martinez of PSP Diesel put together this triple turbo 6.0L Powerstroke engine. Under the hood of his single cab, single rear-wheel truck, find out what went into the build!
MAHLE Motorsport Ford 5.2L VooDoo Forged PowerPak Pistons
This forged replacement piston is available as a drop-in, ready-to-run assembly that requires no rebalancing or compression ratio change.
Melling High-Performance Oil Pumps for Ford Modular Engines
Ford Modular engines are prone to oil pump destroying crankshaft deflection when using belt-driven power adders or when running very high RPMs. To remedy this, Melling developed a line of chromoly, billet rotor oil pumps.
427 Small Block Ford Nitrous Engine
Looking for a new engine in his ’65 Ford Falcon bracket car, a customer came to IMM Engines to build 650 horsepower. Shop owner Brian Hafliger delivered a 427 small block Ford capable of nearly 700 hp N/A and 1,000 hp on nitrous. Find out what went into the build!
MSD Ignition Blaster Coils for Ford Shelby GT350/GT500 5.2L Engines
MSD developed a replacement coil that incorporates improved windings and material to increase the output of the coil.
