Elgin OE Lifter and Guide Assemblies for LS Engines with Active Fuel Management
Elgin’s pre-assembled sets feature the same parts offered by GM, including two each of the AFM-equipped engine’s front and rear guides and lifters. All parts are marked for fast, easy installation.
454 ProCharged LSX Engine
One thing we missed about not having a live PRI Show in 2020 was seeing the engine build for the annual Sunnen Charity Engine Sweepstakes. As a way of reminiscing, we’re going to give you a glimpse at the 2017 Sunnen Charity Engine Sweepstakes build – a 454 cubic inch ProCharged LSX engine done by
Hooker BlackHeart Jeep Wrangler LS/LT Engine Swap Mounting Brackets
These engine mounting brackets are one part of a fully engineered swap system that provides maximum component clearances, ideal drivetrain geometry and clearance for swap headers and exhaust system.
Whipple Supercharged 427 LS Engine
Looking to replace a Roots-blown 383 small block in his Pro Street ’66 Chevelle, customer David Hollis turned to Nick Chauffe and Steven Garcia of C&G American Muscle Cars to crank it up a notch under the hood. They delivered a Whipple Supercharged 427 LS engine – and it’s glorious! Check it out!
Holley EFI Modular Lo-Ram EFI Manifolds for GM LS3
The Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications.
ProCharged 1,600-HP LSX Engine
Founded in 1929, Scoggin-Dickey Parts Center or (SDPC) is a fourth generation, family owned and operated, wholesaler of GM parts and engines located in Lubbock, TX. Scoggin Dickey Parts Center also has advanced engine machining equipment within its SDPC Raceshop, where complete ground-up engine builds and modified new crate engines are built. The Raceshop can
Infiniti G35x LS2 Engine Swap
What started as a stock 2007 Infiniti G35x four-door sedan, has since turned into a drift car thanks to the work of DRZA Auto. The shop swapped the G35’s V6 3.5L engine for a V8 LS2. The job was more complicated than just that, however. Find out what went into the build.
Forced Induction 427 LSX Engine
When Ramiro Ramirez of Fatboys Racing Engines reached out to us again about the details of a competition level, forced induction engine he was building for a Trans-Am WS6 chassis, we had to know more. Check out this turbocharged 427 cid LSX build!
406 cid Twin-Turbo LS Engine
“The idea with the car is to have it appear and sound like a clean Foxbody. That’s the reaction I’m going for. If I pull into a car meet, I want people to say, ‘Hey, look at that. That’s clean, man. It’s probably got a cam in it.’ Then, you pop the hood and people will say, ‘Oh $&#@.’” Find out why that’ll be an appropriate response for this 406 cid twin-turbo LS engine!
Engine of the Week February 2021 Recap
In this recap of February’s Engine of the Week features, we highlight a 450 cid single-turbo LS engine built by Flaco’s Performance & Tuning; a ProCharged 400 cid LSX engine built by SDPC Raceshop; a four-valve Suzuki race engine built by Vance & Hines; and a Ford 5.0L Coyote engine built by Esslinger Engineering.
ProCharged 400 cid LSX Engine
With a chassis built by Miller Race Cars for a drag racing application, an SDPC Raceshop customer recently got this ProCharged 400 cid LSX engine built, which runs on race gas and methanol. Find out what helps this engine make 1,600 horsepower!
450 cid Single Turbo LS Engine
After crashing his Chevy S-10 named Toxic during a No Prep race, Sergio ‘Flaco’ Gonzalez rebuilt the truck and its LS engine set up for radial drag racing and has been competing there ever since. You won’t believe what Toxic’s new 450 cid single-turbo LS engine is capable of.
