Summer Vibes and a Dream Engine Giveaway
How can you not love summer? Sure, it gets hot, but it definitely beats the cold, and there’s so much going on to occupy your time. Here at Engine Builder, our team has stayed extremely busy attending racing events, shows, visiting manufacturers and engine shops, as well as our usual content work.
98mm Twin-Turbo 572 cid SMX Engine
After keeping his 1993 wagon stashed away for the past nine years, when Steve Morris of Steve Morris Engines was ready to race again, he knew the wagon needed something special. Steve gave it a full Pro Mod chassis and one of his twin-turbo 572 cid SMX engine setups! Check out this awesome billet engine!
Twin-Turbo 427 cid LS Next Engine
Hoping to run low-7s or even sub-6.50s, Stefan Rossi’s Sick Week changed on his very first run. Despite a crash, Stefan was unscathed and he and his team finished the week. The car features a twin-turbo 427 LS Next engine built by Stefan at his engine shop, ACE Racing Engines. Check it out!
Noonan’s 4.8″ Billet Hemi Engine
During the 2021 PRI show, we got the chance to catch up with the folks at Noonan Race Engineering to chat about one of the shop’s best-selling engine combinations – a 4.8″ billet Hemi engine – which can be used in applications such as NHRA Pro Mod, Top Alcohol, Outlaw Pro Mod, and Tractor Pulling to the tune of 3,000+ horsepower. Find out what went into this billet build.
2,000+ HP Capable GT500 Short Block
Starting out building custom drag race engines, Fast Forward Race Engines has transitioned into doing batch engine work for other shops the last decade. One of it’s best-selling short blocks is this 2,000-HP capable GT500 and we’ve got all the details.
3,000-HP Twin-Turbo 427 cid LS Engine
Stefan Rossi of ACE Racing Engines recently took a month off from building customer engines in an effort to focus on rebuilding his 1966 Chevy Nova SS drag car equipped with a twin-turbo 427 LS engine to compete at Drag Week. He didn’t end up making it to Michigan this year, but he still wound up with a 3,000+ hp LS build. Check it out!
Chris Varni’s Orange Crush – Turbocharged 400 cid SBF Engine
If you’re familiar with the Street Outlaws No Prep competition, chances are you’ve seen a 1988 Fox Body Mustang called Orange Crush. Driven by Chris Varni, Orange Crush features a 400 cubic inch small block Ford engine under the hood built by Nick Dixon and the guys at Pro Street Engines in San Antonio, TX.
4.9″ Billet Hemi ‘Big Dawg’ Engine
When we spoke with Darrell Makins, shop manager of Noonan Race Engineering in Spartanburg, SC, the shop had 60 billet blocks in queue for production. Noonan Race Engineering starts each build from an 815-pound raw chunk of aluminum. With 60 engines on deck, that makes for nearly 49,000 lbs. of raw aluminum. After getting machined,
ProCharged 5.0L Coyote Engine
Samantha Moore of Vector Motorsports got hooked on racing right out of college and hasn’t looked back ever since. Now she’s one of the best in the NMRA Limited Street class with her 2014 Mustang and its ProCharged 5.0L Coyote engine. See what went into this impressive build!
ASCS 360 Sprint Car Engine
Salina Engine located in Salina, KS is a shop strictly focused on racing engines. Its primary market is Sprint Car engines, but it also works on Dirt Modified, Dirt Late Model, Dirt Stock Car, and NHRA Super Class engines. Many people familiar with Salina Engine can identify the shop’s work due to its signature look
Harley-Davidson Revolution Max 1,250cc V-Twin, Liquid-Cooled Engine
Harley-Davidson’s Revolution Max 1250 engine was assembled at the company’s Pilgrim Road Powertrain Operations facility in Wisconsin. The V-Twin features a 1,250cc displacement with a bore and stroke of 4.13˝ (105mm) x 2.83˝ (72mm) and is capable of 150 horsepower and 94 ft.-lbs. of torque with a peak rpm of 9,500 and a 13:1 compression ratio.
Whipple Supercharged 427 LS Engine
Looking to replace a Roots-blown 383 small block in his Pro Street ’66 Chevelle, customer David Hollis turned to Nick Chauffe and Steven Garcia of C&G American Muscle Cars to crank it up a notch under the hood. They delivered a Whipple Supercharged 427 LS engine – and it’s glorious! Check it out!
Two-Cylinder V-Twin Chevy Engine
Sometimes being a hoarder pays off. Johnny Gardner and his son were doing some spring cleaning in the shop and found a box of blown up small block Chevy parts. Not wanting to see the parts go to waste, it turned into a challenge to build something with them. The result was a one-of-a-kind two-cylinder V-Twin Chevy engine!
All-Aluminum 535 Pontiac Engine
In this episode of Engine of the Week, we’re talking about an all-aluminum 535 cu.in. Pontiac engine built by Bill Ceralli of Ceralli Competition Engines for a drag racing application. According to Ceralli, this brand-new build is naturally aspirated, features a single carburetor, an All Pontiac Indian Adventures block and some used All Pontiac Tiger
Work Stock/Pro Street 6.7L Cummins Engine
In the Midwest, the Work Stock class is a very large, very serious class featuring 900-plus horsepower engines, so when a customer came to LinCo Diesel Performance for a new engine, the shop built this 6.7L Cummins with plenty of bells and whistles. It has plenty of horsepower too. Check it out!
Forced Induction 427 LSX Engine
When Ramiro Ramirez of Fatboys Racing Engines reached out to us again about the details of a competition level, forced induction engine he was building for a Trans-Am WS6 chassis, we had to know more. Check out this turbocharged 427 cid LSX build!
2,000 HP 416 cid LT Engine
Late Model Engines just finished building an LT engine combination capable of 2,000 horsepower! Utilizing GM’s 6.6L iron block and a bunch of other aftermarket goodies, find out why this combination is expected to take the LT market by storm.
Single Turbo LBZ Duramax Dragster Engine
Having carved out a niche in Duramax engine work, Jeff Dean’s shop, On Track Automotive & Diesel Performance, showcased what a single-turbo LBZ Duramax engine could do as the diesel performance segment grew. Find out what went into this Top Diesel dragster build.
Ford 5.0L Coyote Engine
On the brink of going under following the recession, Esslinger Engineering was saved by a well-off customer who bought the business. Today, the more than 50-year-old engine shop is beginning a Ford 5.0L Coyote engine program. Find out what goes into these high-horsepower builds.
6.7L Enforcer Engine
After pushing his triple turbo 6.8L Cummins engine to its limits and paying the price for it, Josh McCormack didn’t let the blown up engine of his dreams keep him from another engine build. This time he turned to D&J Precision Machine’s 6.7L-based Enforcer. Find out what went into the custom build.
