A Look Into Jon Kaase’s Shaft-Mounted Rockers for Big-Block Fords
At first glance, Jon Kaase’s new shaft-mounted rocker arrangement for his P-51 big-block Ford cylinder heads conveys stability. To the competition valve train, it contributes both strength and accuracy. However, the new arrangement possesses many more appealing prospects, some of which are concealed. For example, the 0.900in wide aluminum rocker bodies are characterized partly by
New lightweight, aluminum oil pumps for 429-460 big-block Fords from Jon Kaase Racing Engines
These aluminum pumps are redesigned to eradicate fractures at mounting base and to improve idle and high rpm oil pressure Company: Jon Kaase Racing Engines, Inc. JonKaaseracingengines.com One of the main problems that beset tuners of big-block Ford engines is oil pump failure. The casting develops a fracture at the section change around its mountings, which
Comp Eliminator 347 cid Small Block Chevy Engine
Utilizing a unique block, a particular cylinder head and manifold combination and some parts from an old Pro Stock truck engine, Sandy Wilkins of Wilkins Racing Engines built his customer a 347 cid small block Chevy engine for Comp Eliminator that should make 2.88 horsepower per cubic inch! Check it out!
Billet Blocks and Heads vs. Cast Iron
Billet aluminum has a lower yield strength or higher modulus of elasticity, meaning it will flex, or absorb energy easier under tension or stress than cast aluminum, without incurring permanent damage.
Stroker 421 cid Small Block Chevy UMP Dirt Modified Engine
When it comes to Dirt Modified engines, customers are looking for an engine combo that is durable and produces good power. For those reasons, Gibbons Motorsports’ stroker 421 cubic inch small block Chevy engine is a go-to package, and has thrived in this segment of racing. Check it out!
Supercharged 406 cid Small Block Chevy Engine
Owned by Scott Mueller since the 1980s, this 1934 Ford hot rod features a supercharged 406 cubic inch small block Chevy engine capable of 1,000 horsepower and low-8-second passes. Check it out!
Hilborn-Injected 421 cid Small Block Chevy Engine
It doesn’t get much cooler than a bright red 1967 Chevy Nova… that is until you add a Hilborn stack-injected intake manifold onto a 421 cubic inch small block Chevy engine and stuff it between the frame rails! Built by David Senderhauf and Knowlton Thunderheads & Racing Engines and tuned by Starr Performance Tuning, Joshua Norris’ Nova is certified badass. Check it out.
Choosing the Correct Block for Your LS Engine Build
Whether you’re scouring junkyards, ordering cores, investigating factory options, looking at aftermarket cast iron or aluminum blocks, or spending big bucks on billet LS blocks, you’ve probably noticed it’s been harder to find exactly what you want for the foundation of your LS build than it historically has.
434 cid Small Block Chevy Nitrous Engine
Competing in the High 5 class at the 2022 Builder’s Brawl, Kyle Needham and his 1979 Camaro were relying on a 434 cid small block Chevy nitrous engine to help get the win. Check out the details of this build!
RIMAC Big Blue’s “Little Brother” – 500 lb. Spring Tester & Dial Indicator Bracket
The familiar blue powdercoated tester is made from quality cast-aluminum construction making it rugged enough for everyday use.
Jesel Announces Big Leadership Changes
Jesel Inc. has announced that after 42 years, Dan Jesel will be transitioning from president and CEO to executive chairman effective immediately. Rich Runne, a 31-year company veteran will assume controlling interest and the CEO position in partnership with Wayne Jesel. “Jesel has been my life for the past 31 years,” says Rich Runne. “The
F1X ProCharged 427 cid Small Block Ford
Seeing a 1986 Ford Mustang might make you think there’s an LS engine under the hood, but you’d be wrong about Jeremy Mifflin’s drag car. This Ford stays true to the blue oval thanks to an F1X ProCharged 427 cubic inch small block Ford engine. Check it out.
Jeremy Mifflin’s ProCharged 427 cid Small Block Ford Engine
Among the larger crowd of big block Chevy and Hemi engines seen at the 2022 Builder’s Brawl this past summer was Jeremy Mifflin and his ProCharged 427 cubic inch small block Ford. He stood out from the rest, but in a good way, and his Ford is our Engine of the Week!
MBE Small Block Ford Cylinder Heads and Manifolds
After an intensive research and development process, MBE has developed the most highly engineered small block Ford cylinder head in existence! MBE’s new design is produced exclusively in billet for ultimate performance. It works best in big-inch or high-rpm applications running the standard 4.400-inch bore spacing, and it is sure to be a big winner
355 Small Block Chevy Demolition Derby Engine
If you aren’t familiar, there’s a lot more to a demolition derby than most people might think. There’s also a lot more to the engines in these high-dollar competitions than you might think. Just check out this Baldwin Racing Engines-built 355 small block Chevy! It can run with no water for an hour!
2,000+ HP Capable GT500 Short Block
Starting out building custom drag race engines, Fast Forward Race Engines has transitioned into doing batch engine work for other shops the last decade. One of it’s best-selling short blocks is this 2,000-HP capable GT500 and we’ve got all the details.
W Series Goes Bigger in Texas for Spectacular Season Finale
W Series, the international single-seater motor racing championship for female drivers, will conclude its 2021 season with a double-header at the Circuit of the Americas, Austin, Texas, USA. The series’ seventh and eighth rounds of the season – and first races to be staged outside of Europe – will take place on 23 and 24
Supercharged 331 cid Small Block Ford Engine
After a liver transplant left Lonnie Smith with more time on his hands than he knew what to do with, he decided to build another hot rod. He found this ’88 Ford Ranger GT in Kentucky and has spent the last 13 years modifying it. The latest addition is a supercharged 331 cid small block Ford engine. Check it out!
4.9″ Billet Hemi ‘Big Dawg’ Engine
When we spoke with Darrell Makins, shop manager of Noonan Race Engineering in Spartanburg, SC, the shop had 60 billet blocks in queue for production. Noonan Race Engineering starts each build from an 815-pound raw chunk of aluminum. With 60 engines on deck, that makes for nearly 49,000 lbs. of raw aluminum. After getting machined,
ZSR’s 438 Small Block Ford Engine
Looking to break out with an engine shop all his own, Zach Smith wanted to make sure his shop would have a niche market. He chose to build only Ford engines since those were the powerplants his family always raced with. Zach and his wife Tori opened ZSR Engines in 2015. The shop was initially
