Race Engine Challenge Crowns Greg Brown Dyno Champ
The inaugural American Iron 2-valve Shootout Race Engine Challenge, presented by VP Fuels and Lubricants, held October 2-6, 2018 in Charlotte, NC, featured 12 engine builders from across the United States putting their most creative builds against each other in a dyno racing competition. Following five days of competition, Greg Brown, Hammerhead Performance Engines, Snellville, GA, was
Vintage British Leyland Engine
When a repeat customer came to Fowler Automotive with a vintage Mini Cooper and its British Leyland engine looking to race with it, Ladd Fowler was eager to help make it a winning combo. The job wasn’t easy, but once Fowler was done with the rebuild, the car was no longer at the back of the pack. Find out what went into bringing this British Leyland engine back to life.
Small Diesels, Big Future – What New 2.8L/3.0L Diesel Engines Bring to the Table (and Your Shop)
While it’s not hard for us to get caught up in engines from long ago, given the nature of our industry and work, it’s just as important to keep an eye on present and future engines coming into the market. The small diesel market in particular has seen a few new engines recently and we wanted to highlight a couple of them.
747 Big Block Chevy Nitrous Engine
Tired of seeing blower engines in Top Dragster, Bob Reinhardt of MadCap Racing Engines wanted to build a nitrous engine for his customer. The result was a 1,500 hp 747 big block Chevy nitrous engine. Find out what went into the build!
Twin-Turbo Nissan VR38 Engine
Mitchell Wilson’s shop, Engineered Performance, was asked to make big power out of a Nissan VR38. Wilson specializes in Nissans and got to work creating a unique build that he calls the Beast from the Middle East. Find out what makes this beast roar!
Wagler DX 460 Engine
Most of this Wagler DX 460 engine from head to toe gets brought in on pallets of aluminum and is machined into a complete engine. With hours upon hours of engine design and development Jeremy Wagler has this DX 460 engine singing to the tune of 2,500 hp.
1981 Toyota 3TC 1.8L Engine
Not one to limit his engine prowess, James Hamilton Jr. of Hamilton Performance Engines doesn’t only work on marine, drag race, or street engines. He stays profitable by knowing how to work on all engines. In that effort, he got straight to work on this 1.8L Toyota 3TC engine.
Small Block 363 Ford Engine
Just three short years ago, Aaron Yaghoubian was a kid with a hot rod hobby. He didn’t know much about engine and machine work, but after buying Arlington Machine, he got a mentor and put forth his full effort to make himself and his shop a success. Today, he’s rebuilding engines like this small block 363 Ford engine.
V16 Marine Engine
Are you looking for more power out on the water? Sixteen Power, LLC’s all-new V16 marine engine is the engine the marine market didn’t know it needed. It was recently unveiled at the Miami International Boat Show.
Hedman Hedders Long Tube Race Headers for Late Model Mopars
Hedman Hedders has announced its new 2-inch Long Tube Race Headers for the 2006-2017 SRT8 and the 2009-2017 R/T Dodge Charger, Magnum, Challenger, and Chrysler 300 vehicles. These headers feature full stainless steel construction and are designed to deliver maximum exhaust flow and power from a modified HEMI engine.
Trans Dapt LT Engine Swap Mounts
Trans-Dapt Performance Products has announced its new Gen 5 LT Engine Swap Mounts for classic American, factory small block Chevy-equipped passenger cars.
Hedman Hedders LS Swap Cast Iron Exhaust Manifold
Hedman Hedders has announced its new LS-Swap Cast Iron Exhaust Manifolds for American muscle cars, trucks, and street rods. These manifolds feature a compact design, durable construction, and are available in four different finishes to complement your build and style.
Art Chrisman Receives the Robert E. Petersen Lifetime Achievement Award
Few names in hot rodding and drag racing carry the cachet of Art Chrisman. The Petersen Automotive Museum honored him with the 2015 Robert E. Petersen Lifetime Achievement Award at the annual SEMA Awards Breakfast.
2015 Mustang Ecoboost Four Pulls Strong But is No V8
Babcox tech editor Larry Carley had the opportunity to test drive the 2015 Mustang GT as well as the new Ecoboost 2.3L four-cylinder Mustang at the Autobahn race track in Joliet, Illinois recently. Ford provided the pair of Mustangs as part of the Midwest Automotive Media Assn. fall rally.
Hedman’s Headers for 1978-1987 GM G-Bodies
GM’s G-Body platform was the foundation for many of the most memorable and legendary automobiles that hit the streets during the 1980s. The Monte Carlo, Regal, Cutlass and El Camino each had their own unique style and packed some of GM’s most potent V8 engines of the era. Thanks to the platform’s light weight and
Labor Costing Study: Rebuilding The Chrysler Hemi 5.7L and 6.1L
Originally tagged the “Double Rocker Shaft V8,” it soon became “the Hemi.” It made a lot more power than the rest of the car engines that were available at that time, so some people say Chrysler started the “horsepower wars” with the Hemi. • With its good ports and bigger valves that opened away from
Variable Valve Timing Systems
By the early 1990s, almost all import automotive manufacturers had a successful variable valve timing (VVT) system in production. These systems offered higher performance from smaller displacement engines at higher rpm. As these vehicles exceeded their new car warranties, technicians learned the ins and outs of these systems and how regular oil changes could increase
Intake Manifold Cleaning Caution (#1)
If piston failure occurs in this engine, it is possible for broken pieces of piston to end up in the intake plenum. This is due to the design of the engine, which has tuned runners with the plenum located below the runners. The piston pieces may be ingested into the engine if they aren’t removed
2011 Machine Shop Market Profile – Part 1
For what seems like an eternity, it has almost become commonplace to wait for the eye roll, the shake of the head and the hangdog expression before hearing the familiar refrain, “Oh, man, let me tell you…” In the engine building business, of course, the standard response industry-wide has, for many years, been simple:?Lousy. Numbers
Ford 4.6L SOHC Labor Cost Study
Ford has built the 4.6L motors in both the Romeo Engine Plant, located in Romeo, MI, and at the Windsor Engine Plant and the Essex Engine Plant, both located in Windsor, Ontario, Canada. The 4.6L has been offered in 2-valve SOHC, 3-valve SOHC and 4-valve DOHC versions. The engines were also offered with both aluminum