762 cid N/A Hemi Engine
Known for 500-1,000 cid engines for drag racing, truck pulling, extreme muscle cars, and boat applications, Sonny’s Racing Engines has been delivering innovative engine designs and uncompromising performance for more than 50 years. Excellent examples of that engineering are the engines Sonny built for Sunnen’s Charity Engine Sweepstakes. The 2019 engine is this 762 cid Hemi. Find out what went into the $66,000 build!
440 cid Whipple-Blown LS Engine
Attracting customers from hot rod users to doing motors for the Fast and the Furious and the Batmobile to the Drift series, King of the Hammers and Baja 1000, CBM Motorsports churns out a lot of engines. Above all else, the shop, which specializes in LS engine work, does its most business for sand rails, and that’s where this 440 cid Whipple-blown LS engine is heading. Find out what went into this supercharged build.
376 cid LS3 LSR Engine
When a customer came to Mullenix Racing Engines wanting to kick it up a level from his stock bottom end and stock heads, engine builder James Mullenix built him a 376 cid LS3 LSR engine. Find out what went into this LS build and what kind of power it’s cranking out!
Mitsubishi 4G63 2.0L Evo 9 Engine
After going through countless engine set ups with his Mitsubishi Evo, Robert came to Arlington Machine to meet his goals of making mid-8 second, 1/4-mile passes. Arlington Machine owner, Aaron Yaghoubian, got to work and delivered a 1,000+ hp 4G63 2.0L Evo 9 with loads of boost. Find out what went into this build!
6.6L LML Duramax
Travis Turner discovered there wasn’t anyone in his area working on diesels, or anyone who really knew much about them, so he set out to change that. He started Pure Addiction Diesel Performance in 2013 and has been building diesel trucks and engines ever since, just like this 6.6L LML Duramax that puts out 1,200 hp! Find out what went into this diesel build.
466 cid LS7 Engine
When you walk the floor of the SEMA Show there’s no shortage of amazing cars, engines and parts in every direction! Just take this 466 cid LS7 engine inside a Chevelle SS as an example! We stopped by Mast Motorsports to get the details. Find out what went into this Mast Motorsports-built LS7 engine!
440 cid LSX Methanol Engine
After spending time as a Marine, Kyle Thompson returned to civilian life with a serious need for speed. He started Thompson Motorsports to feed his passion, and today the Texas-based engine shop churns out 550 engines a year like this 440 cid LSX methanol engine for radial drag racing! Find out went into this low 4-second engine build!
Import Drag Racing
The import racing community is bigger than ever, and with drag racing classes such as All Motor, Nitro All Motor, Sport Front-Wheel Drive (SFWD), All-Wheel Drive (AWD), Index class, and others, we don’t see it going away any time soon.
Chevy SB2 Engine
When a turnkey opportunity with an established business on its last legs fell in the laps of Clayton and Christine Smith, it was too good to pass up. Today, what is now Fastime Racing Engines, builds all kinds of domestic V8 horsepower, including this Chevy SB2 engine for dirt modified. Find out what went into this build!
The Dirt on Demolition Derby Engines
Fair food, warm summer nights and the roar of engines firing up can only mean one thing – it is demolition derby season. The days of going to the junkyard and picking up a beater, knocking the windows out, and heading down to the derby are long gone. Now are the days of 400+ horsepower engines, custom drivetrains, cradles, and reinforced cars with solid steel “pointy” bumpers.
428 cid Gen III Hemi Hellcat Engine
Ever since the Hellcat came out, Sampson Racing Engines has gotten into the 6.2L/6.4L BGE-based engines. The MN-based engine and machine shop recently completed a 428 cid Gen III Hemi Hellcat engine with some high horsepower capability. Find out what went into the machine work and build!
LML Duramax Engine
Just like most who become enamored with diesel engine work, Ray McClelland Jr. started tinkering at a young age. A new transmission, new clutch, upgraded tune and a turbo, and now he’s made it a career creating diesel performance at his shop, Full Throttle Kustomz Diesel. Ray recently finished this LML Duramax build, which is ready to take on a drag race, a sled pull and a dyno run, but it hasn’t forgotten its street manners. Find out what went into the build!
ProCharged Top Sportsman Engine
Scott Duggins of PAR Racing Engines will build anything from a 434 small block to a 860 cid big block, including this blown, ProCharged Top Sportsman engine. Find out what went into this fast, high-horsepower build!
358 cid National Late Model Chevy Engine
With an extensive background in building race engines, Mike Hedgecock has been running Eagle Racing Engines for nearly 40 years! He now runs the shop with his son and grandson churning out complete engine builds like this 358 cid National Late Model Chevy engine. Find out what goes into these race-ready builds!
Building an ASCS Sprint Car Engine
Salina Engine’s primary focus is on racing engines, with its main market being sprint car engines for various sanctioning bodies.
RY45 Ford Dirt Late Model Engine
Larry Clark is an engine builder who needs no introduction, and never settles for anything less than perfection at his shop, Custom Race Engines. After coming back to engine building after a short retirement, he has been building RY45 Ford dirt late model engines better than he ever has, with a focus on a smooth power curve and custom components. Find out what goes into these incredible dirt late model engine builds!
Energy Manufacturing Ltd. Big Block Chevy Components
The BBC product line-up includes the billet aluminum engine blocks, cylinder heads, intake manifolds, rocker systems, and related kitted parts. A variety of options and mated assemblies are also available without unreasonable production delays.
4.500˝ Bore Space ROX Small Block Chevy
When NASCAR’s RO7 came out, there were two different cylinder heads GM had to take over the SB2, but one of them (the RO3) was never approved. Vic Hill noticed the RO3 head would be great for short track racing, so he bought up all the RO3 heads GM had and put his shop, Vic Hill Racing Engines, at the forefront of building 4.500˝ bore space ROX SB Chevy engines for dirt late-model racing. Find out what goes into these special engine builds.
4.400˝ Bore Space 432 cid Small Block Chevy
According to Jay Dickens of Jay Dickens Racing Engines (JDRE), he’s never seen a better running engine than his 4.400˝ bore space small block Chevy race engine. And there must be something special about it, as more than 75 race teams trust JDRE with their engine builds. Find out what goes into this 432 cid small block Chevy build!
540 cid Vortech Blower Top Sportsman Engine
Oakley Motorsports sponsors the Top Sportsman / Top Dragster classes for Division 3 in NHRA. The shop is well-known for building nitrous engines in those classes, however, as centrifugal blowers have been getting more and more popular, shop owner Phillip Oakley knew he’d have to try his hand at one of those engine builds. The result is this 540 cid Vortech Blower Top Sportsman engine. Find out the details of this very powerful engine build!
