408 LS Engine
Whether his customers need 300 hp or 2,500 hp, Luke Siebert of Siebert Performance has them covered. His shop specializes in performance engines and carburetor work, and churns out gems like this 408 LS engine for bracket racing. Find out the details of this 740 horsepower engine.
Kamikaze Chris’ 566 cid Big Block Chevy Engine
Kamikaze Chris of Street Outlaws told Graham Jones of FastTimes Motorworks that his new engine needed to have ‘a bunch of power.’ The rest was up to Jones and his shop. Find out the details that went into making this 566 cid big block Chevy put out 1,000 hp more than the previous engine in the El Camino!
747 Big Block Chevy Nitrous Engine
Tired of seeing blower engines in Top Dragster, Bob Reinhardt of MadCap Racing Engines wanted to build a nitrous engine for his customer. The result was a 1,500 hp 747 big block Chevy nitrous engine. Find out what went into the build!
Twin-Turbo Nissan VR38 Engine
Mitchell Wilson’s shop, Engineered Performance, was asked to make big power out of a Nissan VR38. Wilson specializes in Nissans and got to work creating a unique build that he calls the Beast from the Middle East. Find out what makes this beast roar!
Ford GT 500 5.8L Engine
Michael Rauscher of L&M Engines credits his custom camshaft design work for generating all the power in his Ford GT 500 5.8L engines. Find out how L&M gets these engines revving to the tune of 1,500 hp!
454 cid Procharged LSX Engine
Engine of the Week returns in 2018 with a special 454 cid Procharged LSX engine built by Patterson-Elite Performance for Sunnen’s Charity Engine Sweepstakes for Victory Junction. The 1,300 hp LSX helped raise tens of thousands of dollars for a good cause.
Mazda Miata BP4W Engine
A standard Miata engine normally aspirated makes about 100 to 115 hp. This Mazda Miata BP4W engine built by Chris Graham of Race Engineering made over 245 horsepower. The Spec Miata it goes in is now so fast that Chris and the car’s owner broke the gas pedal during testing.
347 Small Block Ford Engine
Mike Consolo of QMP Racing Engines spent more than four and a half years rebuilding this 347 small block Ford for a customer’s road racing Sunbeam Tiger. All said and done, the engine puts out 625 hp and is race ready once again.
Chevy 348 and 409 Strokers
Chevy strokers are pretty common. But how much do we hear about Chevy’s less produced engine, the 348/409 W motor? Surprisingly, they offer a pretty impressive number of options.
Pontiac GTO 400 Ram Air II Engine
A customer of RPM Engines & Machine recently found a Pontiac Ram Air II GTO in a junkyard. He turned to Nate Cutler to freshen up the motor in the rare car. Nate brought the old iron back to life.
555 ProCharger Engine
Reher-Morrison Racing Engines built this 555 ProCharger engine specifically for the Top Sportsman and Top Dragster ranks in NHRA. The engine makes a consistent 2,000hp, features a supercharger, and can be raced all-year long.
383 LS1 Engine
A customer recently brought Matt Dickmeyer of Dickmeyer Automotive Engineering a 383 LS1 engine with a few issues. Matt worked his magic to turn this into a 1,300hp turbocharged beast.
Valves and Valve Seats – There’s More than Meets the Eye
The valves and seats in an internal combustion engine play a central role in engine breathing, compression, performance and longevity. It doesn’t matter if an engine has two, three, four or even five valves per cylinder or if the engine is gas or diesel because the valves all do the same thing: they open and close to allow air into the cylinders and exhaust to exit the cylinders.
Big-block Chevy Dragster “Hangs Out” at Green Bay Art Gallery
This “turn-key” mid-engined dragster was built by Undercover Motorsports. It is powered be a 555-cubic-inch 900-hp Chevrolet V8 from Dart Machinery, Ltd.
Clarkrange Racing Champ Turned Performance Engine Builder of the Year
The winner of the 2016 Performance Engine Builder of the Year was Larry Pritchett, of Mid-South Racing Engines in Clarkrange, TN. Pritchett was presented the award by Engine Builder magazine at PRI in Indianapolis.
1946-1948 Dixon Motor
A customer of Mike Herman’s at H&H Flatheads wanted an engine build, and gave Herman free reign to do what he wanted. Mike chose a rare Dixon motor to add unique flare to a sleeper hot rod.
Hot Wheels-Inspired Ford Big Block Engine
Jammie Wells was asked to build a Ford big block engine for a Ford Econoline. However, this wasn’t your average customer. This was a build for Richard Rawlings of Gas Monkey Garage and Hot Wheels.
Valves and Seats
The valves and seats in an internal combustion engine play a central role in engine breathing, compression, performance and longevity. It doesn’t matter if an engine has two, three, four or even five valves per cylinder or if the engine is gas or diesel because the valves all do the same thing: they open and close to allow air into the cylinders and exhaust to exit the cylinders.
Hot Engines for Hot Wheels – the Reality of Building Engines for TV
If one of the most recognizable hosts of one of the most popular automotive-based reality TV shows came calling and asked you to build a blown big block to squeeze into a vintage collector car to help celebrate the history of an iconic toy, would you blink? For Jammie Wells, it’s just another day in the shop.
Hot Engines for Hot Wheels
If one of the most recognizable hosts of one of the most popular automotive-based reality TV shows came calling and asked you to build a blown big block to squeeze into a vintage collector car to help celebrate the history of an iconic toy, would you blink? For Jammie Wells, it’s just another day in