Monster Truck Engines & the Laws of Physics
These 1,500 horsepower trucks break the laws of physics at every show by launching 12,000 lbs. 40 feet in the air and performing mind-blowingly outrageous stunts and acrobatics.
Wiseco Expands Ring Compressor Sizes
Wiseco’s piston ring compressor sleeves are an indispensable addition to any engine builder’s toolbox.
Methods 5-Axis Bridge-Type Machining Center
Each machine is made to Methods’ design and engineering standards and is fully backed by Methods industry-leading service and support.
Goodson’s Owner Scott Biesanz Retires
Scott Biesanz, the owner of Goodson Tools & Supplies for Engine Builders, has retired. Biesanz purchased the company in 1979 from the Winona Tool Company and has over 40 years of accomplishments under his belt.
ACT NOW: Tell Congress to Pass the RPM Act and Save Racecars
Protect your right to race! Tell Congress to pass the RPM Act now and stop the EPA from destroying motorsports in 2020.
Snap-on 3/8˝ Drive TechAngle Flex-Head Torque Wrench
The new Snap-on ATECH2FR125B 3/8˝ Drive TechAngle Flex-Head Torque Wrench provides the same benefits as fellow ATECH series tools, but with more range, strength, and accuracy.
Mahle Aftermarket Extends Partnership with Kalitta Motorsports and Introduces Team Mahle
Team MAHLE marks the next level of partnership between MAHLE Aftermarket and the wide network of elite motorsports competitors that support MAHLE. Along with the creation of Team MAHLE, an extended partnership through 2020 was announced with all three Kalitta Motorsports teams.
Comec Announces Comec Incorporated
Comec S.r.l. has announced the formation of “Comec Incorporated” a newly formed corporation that will market and service the company’s highly-respected automotive machine tools.
Cummins R2.8 Turbo Diesel
When it comes to restoring classic cars and trucks, many people opt to go with a LS engine as the powerplant. However, Johny G of Johny’s Garage had a customer recently request a Cummins diesel engine for his 1966 Chevy C10, and although it wasn’t what Johny is typically accustomed to, he was happy to oblige. Find out what went into this Chevy C10 and its Cummins R2.8 turbo diesel engine.
Fastener Fascination
According to ARP’s Chris Raschke, engine builders need to make sure to have the correct fastener for the application first. “When you get a new fastener, you need to take it out of the package, inspect the fastener, make sure there’s nothing wrong with it.
Chassis vs Engine Dyno
We spoke with a couple shops that utilize both dyno types to get their take on the advantages, disadvantages and reasons to have one over the other or both.
Shop Solutions – October 2019
Industry Tips and Tricks
Shop Solutions – September 2019
Industry Tips and Tricks
All Systems Go!
I know the salt this year didn’t live up to the hype, but the hype and anticipation of racing is half the reason we do what we do. Here’s how I prep for a week out on the salt.
Shop Solutions – August 2019
Industry Tips and Tricks
The Salt Makes Me Thirsty
Speed Week this year is August 10-16, 2019. The date evokes a little anxiety for me…as I examine the “to do” list for both land speed cars, car carriers, tools, equipment and spare parts; I reflect back on the previous years that we have been running at Bonneville.
Diesel Oil Relationship Status
If you thought dating was difficult, with sorting through all of those online profiles, and swiping left or right to find a match before even going out on the first date; try to spec out a new oil to see what is difficult.
The Potential in Differential
Is growth part of your business strategy? It comes in a lot of different forms, but when it’s adding a new service offering or product for your customers, it can be nerve-racking at the very least. The additional investment in tools, equipment, training or people weighed against the unknown outcome leaves you holding all the risk, unless there is something that’s a perfect fit.
Mitsubishi Materials and Roush Yates Engines Extend Partnership
Roush Yates Engines announced a multi-year partnership extension agreement with Mitsubishi Materials U.S.A. Mitsubishi Materials will continue to be the official CNC tooling supplier of Roush Yates Engines and Roush Yates Manufacturing Solutions.
Ajusa Launches New Gasket Former Ajustick
Ajusa recently launched a new gasket former marketed under the Ajustick brand. It is a single-component anaerobic sealant (methacrylic anaerobic resin) of medium mechanical strength designed to seal metal components with machined surfaces.