1959 Austin-Healey 3000 MK I 3.0L 183ci Engine
When we stopped by R&R Engine and Machine to say hello to owner Bryan Menke, the last thing we were expecting in a diesel-focused shop was to stumble upon this 1959 Austin Healey 3000 MK I 3.0L 183ci engine. Obviously, we just had to learn more about it.
Small Block Ford Engine
When Lazaro Mesa of Mesa Balancing built this small block Ford engine a year ago it made 600 hp. In the shop for freshening up, this street engine will make around 630 hp once its done.
Mazda Miata BP4W Engine
A standard Miata engine normally aspirated makes about 100 to 115 hp. This Mazda Miata BP4W engine built by Chris Graham of Race Engineering made over 245 horsepower. The Spec Miata it goes in is now so fast that Chris and the car’s owner broke the gas pedal during testing.
Kaase Boss Nine Engine
The Boss 429 was a NASCAR special back in 1969 Mustangs and the Ford faithful have been lusting for the Blue Crescent/Shotgun engines ever since. While others dreamed, the die-hard Ford junkies at Jon Kaase Racing Engines worked, and brought the Boss 429 back to life in the form of the Kaase Boss Nine engine.
6.3L Stroker Power Stroke
The 6.0L Power Stroke engine is beloved by many, but its flaws can make it undesirable to some. However, J&K Engines specializes in Power Stroke engines and has been remanufacturing and stroking the 6.0L to a 6.3L to give the engine new life, better horsepower and torque, and fixed its flaws.
347 Small Block Ford Engine
Mike Consolo of QMP Racing Engines spent more than four and a half years rebuilding this 347 small block Ford for a customer’s road racing Sunbeam Tiger. All said and done, the engine puts out 625 hp and is race ready once again.
632 Big Block Chevy Sportsman Race Engine
Gregg Hekimian is a physicist turned engine builder whose engine development is so top secret he utilizes a laboratory that is off-limits to the public. Find out what special treatments went into this 1,080hp 632 big block Chevy Sportsman race engine.
TA 530 cid Aluminum Big Block Buick Engine
Specializing in Buick performance, Keith Diabo of Gran Sport Autobody recently built this 1,000hp 530cid aluminum block Buick engine for a customer with a Buick GS Stage 1.
S&S-Based Harley-Davidson Evolution V-Twin Engine
A customer in Toronto recently turned to Gregg Dahl and GMS Racing Engines for a Fast Bracket Racing drag bike engine. Dahl answered the call as those engines are his specialty. The result was this 200 hp S&S-based Harley-Davidson Evolution V-Twin engine.
Goodwin Competition Billet Aluminum Semi Hemi Engine
Todd Goodwin of Goodwin Competition, Inc. has seen championship success after developing his own billet aluminum performance engine. Named the Semi Hemi, it is more than capable in drag racing, truck pulling and even marine applications. Oh, and did we mention its one of the highest horsepower pump gas engines in existence.
Small Block 421 Chevy Nitrous Engine
Looking for a more daily-driver-friendly street/strip engine, a customer got exactly what he asked for when he turned to BMS Racing Engines to build a 700 hp 421 Chevy engine with nitrous.
Pontiac GTO 400 Ram Air II Engine
A customer of RPM Engines & Machine recently found a Pontiac Ram Air II GTO in a junkyard. He turned to Nate Cutler to freshen up the motor in the rare car. Nate brought the old iron back to life.
555 ProCharger Engine
Reher-Morrison Racing Engines built this 555 ProCharger engine specifically for the Top Sportsman and Top Dragster ranks in NHRA. The engine makes a consistent 2,000hp, features a supercharger, and can be raced all-year long.
383 LS1 Engine
A customer recently brought Matt Dickmeyer of Dickmeyer Automotive Engineering a 383 LS1 engine with a few issues. Matt worked his magic to turn this into a 1,300hp turbocharged beast.
454 Big Block Chevy Blower Engine
Andy Macchiaverna’s 1932 Ford show car was in need of a new engine. He selected Don Kowalsky of Kowalsky Racing Engines to build a unique big block Chevy engine that only Andy himself could dream up.
Twin-Turbo Ford 3.6L EcoBoost V6 Engine
Doug Yates and Roush Yates Engines had seven months to produce this twin-turbo Ford EcoBoost V6 to power the Ford GT fleet that will defend the 24 Hours of Le Mans title.
572 Chevrolet Engine
Ray Banyas used to hand port cylinder heads back when he first started at a shop called Myles Engineering in Cleveland. Roughly 20-plus years ago he hand ported cylinder heads for an alcohol drag engine that belonged to a customer named Dale Wicks. Recently, Wayne Wicks, Dale’s brother, paid a visit to the shop, which
434 Chevy Small Block Engine
Bruce Nelson takes customer satisfaction very seriously. He doesn’t want customers coming back to his shop for the wrong reasons, and this 550 hp 434 Chevy small block was no exception.
427 Twin-Turbo LS Engine
Ken McCaul of Borowski Race Engines built this hydraulic cam 427 twin-turbo engine with All Pro heads and Cometic MLX gaskets. It makes 1,530 hp on C16 fuel and features twin Bullseye turbochargers.
V16 Marine Engine
Are you looking for more power out on the water? Sixteen Power, LLC’s all-new V16 marine engine is the engine the marine market didn’t know it needed. It was recently unveiled at the Miami International Boat Show.
